New Roof

Retrofit

Underslab Vapour Barrier

Corrosion Control

Damp Proofing

Post-applied

Pre-applied

Hardscape

Softscape

Kitchen & Bathrooms

Water Tanks

Swimming Pool & Fountains

Bridge Deck Waterproofing

Tunnel Waterproofing

Pipe Wrapping

Outverted

Inverted

Impermeable

Permeable

Related Accessories

Heavy Duty Coating

Light Duty Coating

Waterproofing

TDS - DAMPSEAL SGDP-500

MSDS - DAMPSEAL SGDP-500

MSDS - SPRAYSEAL NS-F300-RG

TDS - SPRAYSEAL F300

MSDS - SPRAYSEAL F300

TDS - SPRAYSEAL F300+GE

MSDS - SPRAYSEAL F300+GE

TDS - BRUSHSEAL HB-600-BR

MSDS - BRUSHSEAL HB-600-BR

TDS - PATCHSEAL PS-700-TG

MSDS - PATCHSEAL PS-700-TG

TDS - NS-200R GEOTEXTILE FABRIC

Étude de cas

Roof Waterproofing

Walls

Flooring

ACCESSORIES

Centre d'information

Documents

De A à Z

De Z à A

Date asc

Date desc

Technical Data Sheet

MSDS

Sustainability

Typical Details

NS-TD100TM is a high performance, interior or exterior joint sealant for use in both moving and non-moving joint applications. NS-TD100TM provides a long lasting weather tight seal to a variety of building substrates. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

aaaa

NS-TD100 Sealant

NS-BST&trade; is a 20mils thick ﬂashing tape with anti-skid top ﬁlm surface and made of acrylic adhesive ultra-bonding strength to seal around roof, windows, doors, and other joinery seams. It is suitable for all kinds of wet, hot and cold environments. The rough surface of the backing allows adhesion of spray or liquid sealants and weather-resistant coatings. The adhesive layer is covered with a disposable poly-coated Kraft paper release liner.

NS-BST Seam Tape

NS-SALT&trade; Calcium Chloride Flakes are white, free-ﬂowing ﬂakes that meet or exceed ASTM D98 and AASHTO M144 purity requirements for Type S, Grade 3, Class B calcium chloride. With a minimum of 83% active ingredient (calcium chloride), it is 10% higher than conventional 77-80% calcium chloride ﬂake.&nbsp;

This puriﬁed inorganic salt is produced by removing water from a naturally occurring brine solution. The National Organic Standards Board classiﬁed the brine process as &ldquo;non-synthetic&rdquo; since it does not involve reactions with chemicals such as hydrochloric acid or ammonia.

NS-SALT

TuffDeck GripcoatTM is a three component (resin, hardener, and water), fast drying, waterborne, epoxy primer with low VOC and low odor. For use on concrete, wood, modiﬁed bitumen, and asphalt. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

TUFFDECK GRIPCOAT

TuffDeck 810/850TM is a two component, fast setting, rapid curing, solvent free, ﬂexible, high performance, high solids, urethane-elastomer base membrane that can be applied to prepared interior or exterior concrete, plywood and metal surfaces. Due to its fast gel time, TuffDeck 810/850TM is suitable for applications in temperatures as low as 20&deg;F (-6.7&deg;C). It may be applied in a single application or in multiple applications. TuffDeck 810/850TM is also relatively insensitive to moisture and temperature, allowing applications in various temperatures and humidity. Please use the correct product grade that complies with VOC regulations as per federal, state, county and city regulations/codes at the place of installation of product.

TUFFDECK 810-850

Air Barrier NS-A250-HP&trade; Brush-Grade&nbsp;est un rev&ecirc;tement &eacute;lastom&egrave;re &agrave; base d&rsquo;asphalte con&ccedil;u pour les applications de pare-air r&eacute;sistant aux intemp&eacute;ries dans les secteurs institutionnel, commercial et r&eacute;sidentiel.&nbsp;NS-A250-HP&trade; Brush-Grade&nbsp;est r&eacute;sistant aux intemp&eacute;ries, imperm&eacute;able, r&eacute;sistant &agrave; la vapeur, stable aux rayons UV, &eacute;cologique et s&eacute;curitaire &agrave; utiliser.&nbsp;NS-A250-HP&trade; Brush-Grade&nbsp;est un rev&ecirc;tement &eacute;lastom&egrave;re hautement polyvalent appliqu&eacute; &agrave; froid &agrave; l&rsquo;aide d&rsquo;un pinceau ou d&rsquo;un rouleau. Gr&acirc;ce &agrave; sa capacit&eacute; exceptionnelle d&rsquo;expansion et de contraction, il peut facilement r&eacute;sister &agrave; toutes les conditions climatiques.

AIR BARRIER NS-A250-HP BRUSH-GRADE

Air Barrier NS-A250-HP&trade; est un rev&ecirc;tement &eacute;lastom&egrave;re &agrave; base d&rsquo;asphalte con&ccedil;u pour les applications de pare-air r&eacute;sistant aux intemp&eacute;ries dans les secteurs institutionnel, commercial et r&eacute;sidentiel. NS-A250-HP&trade; est r&eacute;sistant aux intemp&eacute;ries, imperm&eacute;able, r&eacute;sistant &agrave; la vapeur, stable aux rayons UV, &eacute;cologique et s&eacute;curitaire &agrave; utiliser. NS-A250-HP&trade; est un rev&ecirc;tement &eacute;lastom&egrave;re hautement polyvalent appliqu&eacute; &agrave; froid &agrave; l&rsquo;aide d&rsquo;un syst&egrave;me de pulv&eacute;risation. Gr&acirc;ce &agrave; sa capacit&eacute; exceptionnelle d&rsquo;expansion et de contraction, il peut facilement r&eacute;sister &agrave; toutes les conditions climatiques.

AIR BARRIER NS-A250-HP

Air Barrier NS-A250-LP Brush-Grade&trade; is an elastomeric coating for industrial and commercial applications. NS-A250-LP Brush-Grade&trade; is weather resistant, waterproof, vapour resistant, UV-stable, eco-friendly, and safe to use. It is a highly versatile elastomeric coating that is cold-applied using a brush/roller. With its unsurpassed ability to expand and contract, it can easily withstand all weather conditions. NS-A250-LP Brush-Grade&trade; is typically applied over top of concrete, SMU, gypsum boards, etc.

AIR BARRIER NS-A250-LP BRUSH-GRADE

Air Barrier NS-A250-LP&trade; is an elastomeric coating for industrial and commercial applications. NS-A250-LP&trade; is weather resistant, water-proof, vapour resistant, UV stable, eco-friendly, and safe to use. NS-A250-LP&trade; is a highly versatile elastomeric coating that is cold-applied using a spray system or brush/ roller. With its unsurpassed ability to expand and contract, it can easily withstand all weather conditions. NS-A250-LP&trade; is typically applied over top of concrete, SMU, gypsum boards, etc.

AIR BARRIER NS-A250-LP

SpraySeal&trade; NS R200 est un rev&ecirc;tement &eacute;lastom&egrave;re con&ccedil;u pour les terrasses, les toitures, les surfaces m&eacute;talliques et plus encore. Il est&nbsp;r&eacute;sistant aux intemp&eacute;ries, imperm&eacute;able&nbsp;et offre &eacute;galement une&nbsp;protection contre la corrosion. &Eacute;cologique et s&eacute;curitaire &agrave; utiliser.

SpraySeal&trade; NS R200 est un rev&ecirc;tement &eacute;lastom&egrave;re&nbsp;hautement polyvalent, appliqu&eacute; &agrave; froid &agrave; l&rsquo;aide d&rsquo;un&nbsp;syst&egrave;me de pulv&eacute;risation. Il peut &ecirc;tre utilis&eacute; sur une grande vari&eacute;t&eacute; de surfaces,&nbsp;&agrave; l&rsquo;int&eacute;rieur comme &agrave; l&rsquo;ext&eacute;rieur. Gr&acirc;ce &agrave; sa capacit&eacute; exceptionnelle &agrave;&nbsp;se dilater et se contracter, il r&eacute;siste efficacement &agrave; toutes les conditions climatiques.

SPRAYSEAL NS-R200

NS-DTMTM Primer is a versatile self-cross-linking, styrene acrylic latex polymer. This primer is recommended for speciﬁc areas that require enhanced adhesion or corrosion protection.

NS-DTM PRIMER

NovaSet&reg; ISW PatchGrade is a unique trowel applied mastic, caulking material and joint ﬁller. It is composed of an advanced engineered blend of thermo-active polymerized modiﬁed emulsion (PME) technology. This fully bonded, and self-healing waterborne mastic material provides superior resistance and longevity for a multitude of high-performance and complex detailing applications.

NOVASET R250-ISW PATCH-GRADE

NovaSet&reg; ISW BrushGrade is a unique brush, roller or squeegee applied detailing material. It is composed of an advanced engineered blend of thermo-active polymerized modiﬁed emulsion (PME) technology. This fully bonded, and self-healing waterborne detailing material provides superior resistance and longevity for a multitude of high-performance and complex waterprooﬁng applications.

NOVASET R250-ISW BRUSH-GRADE

NovaSet&reg; R250 ISW&nbsp;is a ﬂuid-applied seamless roof membrane. It is composed of an advanced engineered blend of thermo-active polymerized modiﬁed emulsion (PME) technology. This monolithic, fully bonded, and self-healing waterborne roof membrane provide superior resistance and longevity for a multitude of high-performance waterprooﬁng applications.

NOVASET R250 ISW

PatchSeal&trade; PS-700-TG is an elastomeric asphalt emulsion designed for application by trowel or caulking tube. Superior qualities of strength, durability, elasticity and adhesion.&nbsp;

PatchSeal&trade; PS-700-TG is a modiﬁed asphalt emulsion designed for use in a variety of applications. It is easily applied using a trowel or caulking tube, and it can be used both indoors and outdoors.

PYRITESEAL

RadonShieldTM is an elastomeric spray coating that provides waterprooﬁng, mold prevention and radon protection in basements. With its superior adhesion qualities, it bonds easily to most substrates. Like all Naturaseal products, RadonShieldTM is environmentally friendly and safe to use.

RADONSHIELD

MineSealTM is a heavy-duty protective coating for mining and industrial applications. It provides waterprooﬁng, corrosion protection and more. It is an elastomeric asphalt emulsion that provides effective waterprooﬁng and corrosion protection for pipes, equipment, machinery and industrial structures. This product has unsurpassed strength, elasticity and adhesion properties.

MINESEAL C-400

Natura HDProTM is a specially formulated Polyethylene that provides a high environmental stress crack resistance to alkalines and acids found in the soil. In addition, Natura HDProTM is made from 100% Virgin HDPE resin. Our special extrusion process utilizes low heat and low shear to prevent heat degradation in the ﬁnal product. The use of antioxidants and lubricants further ensure a smooth, superior quality membrane that outperforms the industry standard.

NATURA HDPRO

NaturaFlow 7000&trade; est un composite de drainage tridimensionnel haute performance compos&eacute; de trois couches. Il est constitu&eacute; d&rsquo;un&nbsp;noyau de drainage &agrave; excroissances (alv&eacute;ol&eacute;)&nbsp;et de deux couches de&nbsp;g&eacute;otextile en polypropyl&egrave;ne (PP) haute r&eacute;sistance.&nbsp;Un g&eacute;otextile (noir) est&nbsp;thermofix&eacute; aux alv&eacute;oles, tandis que l&rsquo;autre g&eacute;otextile (blanc) est&nbsp;enti&egrave;rement coll&eacute; &agrave; l&rsquo;arri&egrave;re du noyau de drainage. Cette conception procure une&nbsp;surface lisse&nbsp;pour l&rsquo;application de membranes d&rsquo;&eacute;tanch&eacute;it&eacute;&nbsp;appliqu&eacute;es &agrave; l&rsquo;&eacute;tat liquide.&nbsp;Le noyau de drainage est fabriqu&eacute; &agrave; partir d&rsquo;un&nbsp;poly&eacute;thyl&egrave;ne haute densit&eacute; (HDPE)&nbsp;sp&eacute;cialement formul&eacute;, offrant une&nbsp;r&eacute;sistance &eacute;lev&eacute;e aux impacts et aux d&eacute;chirures, et insensible &agrave; la&nbsp;fissuration sous contrainte environnementale.&nbsp;Le g&eacute;otextile&nbsp;anti-colmatage&nbsp;est enti&egrave;rement li&eacute; au noyau de drainage alv&eacute;ol&eacute;, ce qui emp&ecirc;che son affaissement dans les&nbsp;canaux d&rsquo;&eacute;coulement.

NATURAFLOW 7000

NS-200RTM is a needle-punched nonwoven geotextile made of 100% polypropylene staple ﬁbers. NS-200RTM resists ultraviolet deterioration, rotting, biological degradation, naturally encountered bases and acids. Polypropylene is stable within a pH range of 2 to 13.

NS-200R GEOTEXTILE FABRIC

PATCHSEAL PS-700-TG

BrushSeal&trade; HB-600-BR is an elastomeric coating for roofs, decks, metal surfaces and more. BrushSeal&trade; HB-600-BR offers waterprooﬁng, corrosion protection and weather resistance. BrushSeal is a cold-applied product that creates a durable, leak-proof membrane that expands and contracts as weather conditions change. This highly versatile product can be used for a variety of applications both indoors and outdoors, and is easily applied using a brush, roller or squeegee.

BRUSHSEAL HB-600-BR

SpraySeal&trade; NS-F300 + GE&nbsp;est un rev&ecirc;tement &eacute;lastom&egrave;re bicomposant &agrave; base d&rsquo;asphalte con&ccedil;u pour l&rsquo;imperm&eacute;abilisation commerciale, notamment pour les applications d&rsquo;imperm&eacute;abilisation en tranch&eacute;e ouverte, les dalles horizontales, les applications en aveugle (blindside), incluant le b&eacute;ton projet&eacute; (shotcrete), et plus encore.&nbsp;NS-F300 + GE est r&eacute;sistant aux intemp&eacute;ries, &eacute;cologique, s&eacute;curitaire &agrave; utiliser et peut &ecirc;tre appliqu&eacute; sur du b&eacute;ton frais.&nbsp;NS-F300 + GE&nbsp;est un rev&ecirc;tement &eacute;lastom&egrave;re hautement polyvalent appliqu&eacute; &agrave; froid &agrave; l&rsquo;aide d&rsquo;un syst&egrave;me de pulv&eacute;risation afin de cr&eacute;er une membrane durable et sans joints. Il peut &ecirc;tre utilis&eacute; sur une grande vari&eacute;t&eacute; de surfaces. Gr&acirc;ce &agrave; sa capacit&eacute; exceptionnelle d&rsquo;expansion et de contraction, il peut facilement r&eacute;sister &agrave; toutes les conditions climatiques.&nbsp;SpraySeal&trade; NS-F300 + GE (g&eacute;otextile)&nbsp;peut &eacute;galement &ecirc;tre utilis&eacute; en combinaison avec un tissu g&eacute;otextile afin d&rsquo;offrir une r&eacute;sistance sup&eacute;rieure.

SPRAYSEAL F300+GE

SpraySeal&trade; NS-F300&nbsp;est une &eacute;mulsion d&rsquo;asphalte modifi&eacute;e aux polym&egrave;res con&ccedil;ue pour l&rsquo;imperm&eacute;abilisation commerciale, notamment pour l&rsquo;imperm&eacute;abilisation c&ocirc;t&eacute; positif, les r&eacute;servoirs d&rsquo;eaux pluviales, et plus encore.&nbsp;SpraySeal&trade; NS-F300&nbsp;est r&eacute;sistant aux intemp&eacute;ries, &eacute;cologique, s&eacute;curitaire &agrave; utiliser et peut &ecirc;tre appliqu&eacute; sur du b&eacute;ton frais.&nbsp;NS-F300&nbsp;est un rev&ecirc;tement &eacute;lastom&egrave;re hautement polyvalent appliqu&eacute; &agrave; froid &agrave; l&rsquo;aide d&rsquo;un syst&egrave;me de pulv&eacute;risation afin de cr&eacute;er une membrane durable et sans joints. Il peut &ecirc;tre utilis&eacute; sur une grande vari&eacute;t&eacute; de surfaces. Gr&acirc;ce &agrave; sa capacit&eacute; exceptionnelle d&rsquo;expansion et de contraction, il peut facilement r&eacute;sister &agrave; toutes les conditions climatiques.

SPRAYSEAL F300

SpraySealTM NS-F300RG is a high-performance, asphalt-based elastomeric coating designed for residential waterprooﬁng applications such as foundation walls, exterior basement surfaces, crawl spaces, new construction and retaining wall waterprooﬁng. It is cold-applied using a spray system, forming a seamless and ﬂexible membrane that effectively seals against moisture intrusion. This eco-friendly, weather-resistant coating adheres to a wide variety of surfaces and is engineered to expand and contract with temperature changes, making it ideal for year-round protection in any climate. For added reinforcement in areas requiring extra durability, SpraySealTM NS-F300RG can be combined with a geotextile fabric to enhance tensile strength and crack-bridging capability.

SPRAYSEAL NS-F300-RG

DampSealTM SGDP-500 Asphalt Emulsion is an anionic emulsion of a specially reﬁned high penetration asphalt in water. Spray-applied dampprooﬁng system that provides a consistent membrane, in a quick and easy application. DampSeal&trade; SGDP-500 is VOC free and environmentally friendly.&nbsp;

DampSealTM SGDP-500 meets the dampprooﬁng building code for all below-grade residential foundations.